Concentrated Metal Conditioner
For all marine engines (Outboard, Oil Injected Outboard, Inboards, Lower Units, V-Drives and Jet Skis)
No Graphite, Silicone, Teflon (PTFE) or Chlorine
Power Curve Marine XP is exclusively formulated for petroleum and synthetic oils, gear lubes, transmission fluids and grease. Marine XP will not change the refiners additive package or viscosity of the lubricants but blends in to use these lubricants as a carrier to hot spots (high heat problem areas) in you mechanical systems using the heat to open the pores of the metal for penetration. Marine XP penetrates the metal, smoothing the microscopic irregularities, cracks and points of uneven wear on the surface of all metal surfaces. All metal parts that are lubricated are treated and reconditioned.
A smooth, oiled surface creates less friction. The damaging effects of friction, heat build up and wear are significantly reduced which extends component service life. This lowers maintenance costs and down time. Power Curve’s Marine XP also cleans moving parts which are hindered by the build up of sludge, gum and varnish due to lubricant breakdown or a lack of maintenance.
Power Curve Marine XP contains no solids and will not cause any material build up or change even the finest of machine tolerances. Used in conjunction with Power Curve’s other products, your marine engines, lower units and v-drives will perform at peak levels while generating increased fuel savings to you.
- Eliminates “dry” starts
- Increases engine performance, torque, acceleration and horsepower
- Extends life of the engine, lower units and v-drives
- Removes accumulated contaminants
- Protects the moving metal parts against friction and heat (lowers operating temp)
- Improves fuel efficiency and economy
- Penetrates the metal surface to form a polished shield
Apply 1 oz. for every 1 quart of oil. Add to engines and gear boxes 1 oz. per pint of gear lube.
NOTE: Although many Power Curve products have multiple advantages in multiple fluid and lubrication situations, Power Curve does NOT recommend using this product in brake lines of any kind. Power Curve is not responsible for damage or negative effects to brake line systems.